Inflatable product: Preparation before installation: Choose a flat and dry ground. It is best to place a mat (such as carpet, plastic colored strip cloth, etc.) on the ground and then place the inflatable product. Check whether the fan is normal and see if the air inlet of the fan is equipped with a protective net. Connection and inflation: Find the air inlet of the inflatable product, tightly connect the air outlet of the fan with the air inlet of the inflatable product, and fasten it. Connect the fan power supply and wait for a few minutes to let the inflatable product be fully inflated. During the inflation process, check whether there are any abnormal conditions such as wrinkles on the product. During use: Ensure that the power supply and fan are operating normally during use. If the power supply needs to be changed or the fan needs to be turned off, ensure that children have completely evacuated from the inflatable product. Supervise children's play at all times and teach children to follow the game rules to prevent accidents. Post-use handling: Turn off the power, open the fan interface and exhaust port to exhaust. The exhaust time of the product is generally about half an hour (depending on the size of the product). The remaining air can be squeezed manually. If there is water ingress in rainy days, the water must be removed first and dried in the sun. Clean the inflatable product. After removing stains, rinse with clean water and then dry it. When not in use for a long time, fold, bind, and pack the product and store it in a suitable environment.

FAQ
Q: How to repair when damage?
A:
Step 1: Identify the Damage
Thoroughly inspect the inflatable to locate any tears, punctures, or leaks.
Step 2: Clean and Dry the Area
Clean the damaged area with mild soap and water to remove dirt or debris. Allow the area to dry completely before proceeding with the repair.

Step 3: Patch the Damage
Apply a patch specifically designed for inflatable repairs over the damaged area. Make sure the patch is slightly larger than the damaged area to ensure proper coverage. Press the patch firmly onto the surface, smoothing out any wrinkles or air bubbles.

Step 4: Apply Adhesive
If using a patch that requires adhesive, apply a thin, even layer of adhesive to both the patch and the inflatable surface. Allow the adhesive to become tacky before pressing the patch onto the surface.

Step 5: Allow Time to Cure/Allow the Adhesive to Dry
Once the patch is in place, you'll need to allow the adhesive to dry completely. This may take several hours, depending on the type of adhesive you are using. It's important to avoid using the inflatable until the adhesive is completely dry, as this could cause the patch to come loose. Wait at least 1 hour before inflating again.

Step 6: Test the Repair
Once the patch has cured, inflate the inflatable and check for any signs of leakage. If the repair holds, the inflatable is ready to be used again.

It's important to use repair materials specifically designed for inflatables and follow the manufacturer's instructions carefully to ensure a successful repair. If the damage is extensive or beyond your ability to repair, consider seeking professional assistance.

-
Q: Accessories included?
A: Free accessories include Storage Bag / Repair Kit / Warning Label / Custom Logo